VAGCOM 12.12 VCDS12.12 HEX USB CAN Interface

1. VCDS-Lite works with all standard versions of Windows, from Windows 95 though Window 10. Both 32-bit and 64-bit Windows builds work fine, but if you're using a 3rd-Party USB interface, keep in mind that it is your interface supplier's responsibility to provide a driver for his hardware.
2. If your COM port adapter just won't work, try this and see if it helps.Link to download the files:https://mega.nz/#!AI5XBTAS!cx-vrfxOHztHq91LYIK9saw1d10n0Fk8.

Our VAGCOM Cable is demo version, is not a fully activated license.

Note: When you install Vagcom12.12 software,the system will ask for the password.

VCDS Lite VAG-COM 409 CRACK+ USB Drive Full VCDS-Lite is a Windows-based Diagnostic tool for VW/Audi/Seat/Skoda for non-dongle interfaces. 0 software and USB Serial Device driver id 1523314. Download the driver setup file for Ross-Tech Ross-Tech Direct USB Interface driver from the link below.

password(xp and win7 32): xxxROSSTECH

password(win7 64): fdsajkl;YYY

Compare with old version vagcom 12.10.3,what is the different?
1. VAGCOM 12.12 Support to the October 2013 Volkswagen Audi cars.
2. VAGCOM12.12 Change the system time automatically, the software is not expired, permanent and effective
3. VCDS 12.12 Automatically updated offline to prevent flash
4. VCDS12.12 With password protection
5. VAG COM 12.12 Support WINDOW xp and Windows 7 32 and 64 bit.
Description:
1. Is fully compatible with all VW, Audi, Seat and Skoda models through the current model year, including models using a direct CAN connection for diagnostics.
2. Has a database of more than 14000 fault-codes and measuring-block texts.
3. Can use the new 7-Digit PIN/SKC codes to match new keys in all immobilizer equipped VW/Audi/Seat/Skoda models.
4. Allows you to view, log, and graph 3 groups of Measuring Blocks at once.
5. Can access all control modules which require proprietary VAG modes running the KWP-2000 protocols (2001+ Teves Mk.60 ABS, numerous 2002+ modules), KWP6000 (CAN) and/or KWP7000 (UDS).

Functions:
Reset all service indicators (including 2010 and later Audi and VW)
Reads and clears all fault codes
Covers all modules including airbag, ABS, engine, gearbox, central locking etc.
Retracts late model handbrake for pad change
Throttle body adaptions

New Features:
1. Includes partial support for VW Crafter vans. Communications with all control modules;
functions supported: Control Module ID and Advanced ID, Fault Codes (Read and Clear),
Supported Codes, Security Access, and Adaptation. Other functions such as Measuring Values,
Output Tests, and Basic Settings will be added in future versions.
2. New, more universal Airbag Coding Assistant.
3. New “Upload Debug/Log File” function in Applications Dialog
4. Completely revised and expanded ROD (ODX) Data.
5. New USB Drivers. Now compatible with the latest PCs which use Fresco Logic USB3
chipsets.
6. Refactored DTC routines which interpret DTC data, including enhanced interpretation of status
byte for DTCs in UDS modules.
7. New area to display additional info for Basic Settings.
8. Added data types 0B, 0D, 0F to Generic OBD-II Mode 9.
9. New version of LCode. Thanks to Niels in Denmark!.
10. Revised and expanded Label Files. Thanks to Sebastian!
11.Many other small fixes and improvements, as well as everything which was introduced in

PC Requirements:
A computer running Microsoft Windows. A Laptop, Netbook or Tablet computer is best, but adesktop PC can also be used.
VAG COM12.12 diagnostic cable works with Windows 2000, XP, Vista, and both 32-bit and 64-bit).

Packing List:
1pc x Vag diagtool 12.12 diagnostic interface
1pc x CD Software
VAG Vehicle List

VCDS12.12 cables work with pretty much all VAG vehicles from 1994 to 2013 which have CAN, HEX or Dual K lines including (but not limited to!):

Audi A1 2010+
Audi A2 (8Z) 2000 – 2008
Audi A3/S3 (8L) 1997 – 2008
Audi A3/S3 (8P) 2004+
Audi A3 Cabriolet (8P chassis) 2008+
Audi A4/S4/RS4 (8D) 1995 – 2008
Audi A4/S4/RS4/Cabriolet (8E/8H) 2001+
Audi A4/S4/RS4/Cabriolet (??) 2008+
Audi A4/S4/RS4 (“B7” platform) 2005+
Audi A4/S4/RS4 (B8 platform, 8K chassis) 2008+
Audi A5/Cabriolet 2007+
Audi A5/S5 Cabriolet (8F chassis) 2010+
Audi A5/S5 (B8 platform, 8T chassis) 2008+
Audi 100/A6/S6 (4A) 1991 – 1997
Audi A6/S6/RS6/allroad (4B) 1997 – 2006
Audi A6/S6/RS6 (C6 platform, 4F chassis) 2005+
Audi Q5 2007+
Audi Q5 (8R chassis) 2009+
Audi Q7 (4L) 2006+
Audi A8/S8 (4D) 1994 – 2002+
Audi A8/S8 (4E) 2003+
Audi TT (8N) 1999 – 2007
Audi TT (8J) 2007+
Audi R8 (42 chassis) 2007+
Seat Alhambra (7M) 1996+
Seat Altea (5P) 2004+
Seat Arosa (6B/6H) 1997 – 2004+
Seat Exeo (3R chassis) 2009+
Seat Ibiza / Cordoba (6K) 1993 – 2002+
Seat Ibiza / Cordoba (6L) 2002+
Seat Ibiza (6J chassis) 2008+
Seat Inca (9K) 1996 – 2003
Seat Leon / Toledo (1M) 2000+
Seat Leon (1P) 2006+
Seat Toledo (1L) 1992 – 1999+
Seat Toledo (5P) 2005+
Skoda Fabia (6Y) 2000+
Skoda Fabia (5J) 2005+
Skoda Felicia (6X) 1996 – 2001+
Skoda Octavia I (1U) 1997+
Skoda Octavia II (1Z) 2005+
Skoda Pick Up (67) 1996 – 2001
Skoda Roomster (5J) 2006+
Skoda Superb (3U) 2002+
Skoda Superb (3T chassis) 2008+
Skoda Yeti (5L chassis) 2010+ VW Caddy (9K) 1996 – 2003+
VW Caddy (2K) 2004+
VW Corrado +
VW Crafter (2E) 2006+
VW Eos (1F) 2006+
VW Fox/Spacefox/Sportvan/Suran (5Z) 2005+
VW Gol/Parati/Saveiro (5X) 2000+
VW Golf/Jetta II (19E) 1983 – 1992
VW Golf/Jetta/Vento/Cabriolet III (1H) 1992 – 1998+
VW Golf Cabriolet IV (1E) 1999 – 2002
VW Golf/Jetta/Bora IV (1J/9M) 1998 – 2006
VW Golf/Jetta/Bora V (1K/5M) 2004+
VW Golf/GTI/Jetta (1K/5K chassis) 2010+
VW Golf Variant/Wagon (1K chassis) 2007+
VW Golf Plus (5M chassis) 2005+
VW Golf Mk.6 (5K chassis) 2009+
VW LT (2D) 1996+
VW Lupo (6E/6X) 1999+
VW New Beetle/Cabriolet (1C/1Y/9C) 1999+
VW Passat (31/3A) 1988 – 1994+
VW Passat (3B) 1997 – 2005+
VW Passat (3C) 2006+
VW Passat CC (35/3C chassis) 2008+
VW Phaeton (3D) 2002+
VW Phaeton (3D chassis) (“facelift”, MY 2008+) 2007+
VW 6N/6N2) 1994 – 2002+ VW 9N) 2002+
VW Scirocco 2008+
VW Scirocco (13 chassis) 2009+
VW Sharan (7M) 1995+
VW Tiguan (5N chassis) 2008+
VW Touareg (7L) 2003+
VW Touareg (7L6 chassis) ( 2007+
VW Touran (1T) 2003+
VW Transporter ( 70 ) 1991 – 1996
VW Transporter (7D) 1997 – 2003
VW Transporter (7H/7J) 2003+

The list above only shows a few of the vehicles that our cables work with, if your VAG vehicle is not listed, do not worry as our cables work with 99% of all VAG vehicles from 1994 to October 2013. If your VAG vehicle has a 16 pin OBDII port our VCDS cables will work. However, please feel free to contact us if you want to check that your vehicle is compatible.

Current Version of VCDS® for customers with High-
Tech HEX, KEY, KII or Micro-CAN Series Interfaces

VCDS is Copyright 2000-2021 by Ross-Tech, LLC / Uwe M. Ross. All rights are reserved. De-compilation, disassembly, reverse-engineering, alteration, use as a reference tool for the purpose of developing a product with similar functionality, and re-distribution in any form without the prior written consent of the author is prohibited.

By downloading this software, you acknowledge that this Program is provided 'as is' and 'with all faults, defects and errors' and that all use of the Program is at your own full risk. It has been extensively tested, but we cannot guarantee it will work correctly with every system in every car. We will make our best effort to fix any bugs and to enhance the program, but we specifically disclaim any liability for damage to your computer or your car, and we do not promise to have any particular enhancements available on any specific date.

Instructions:

• Download the self-installing distribution file available below.

• Run it and follow the prompts to allow it to install itself.

• The installer will prompt you if you wish to see a PDF of installation instructions. That PDF can be downloaded here.

• You must install VCDS on your PC's hard disk!

  • It may not work properly if you try running it directly from other media.

  • You do not need internet access while using VCDS, however, internet access is required to update the firmware in our current generation of interfaces (HEX-NET and HEX-V2). So make sure your interface firmware is up-to-date before trying to use VCDS someplace that doesn't have internet access.

• Connect an appropriate interface between the computer and the car.

• Turn the car's ignition switch ON. No need to start the engine.

• Start the VCDS program:

  • Click [Options] and select the correct communications port.

  • Use [Test] to confirm that the program can use the port and find the interface.

  • Then [Save].

• Now Play. Make sure the software can reliably access all the control modules that it should in your car. See our Application Charts. Query Fault Codes from some modules.

• Please check frequently for updates! If you're using VCDS on a PC that's on-line, it should tell you when there's an update available, but if in doubt, check this page.

ReleaseNotes:

• Release 21.3 works with Windows 7, 8, and 10 (both 32-bit and 64-bit)

  • Earlier versions of Windows such as 2000, XP, and Vista might still work, but we no longer consider them supported.

  • VCDS does not work on Windows 10 running in 'S mode', because 'S mode' prevents software from being installed from any source other than the Microsoft Store. If wish to use VCDS on a computer that came with the 'S' version of Windows, you'll have to switch it to run in Home or Pro mode. Devices with ARM CPUs are NOT SUPPORTED.

  • Windows running in a VM (Parallels, Virtual Box, etc) may work but is not supported.

  • Windows 95, 98, ME, and NT4 definitely will not work.

• Release 21.3 must be used with a licensed Ross-Tech interface. That includes all genuine HEX-, KEY-, KII-, or Micro-CAN series Interface of interfaces.

  • It does notwork with any third-party interfaces or some of the older 'low-tech' interfaces we made and sold before 2004.

  • If you're a registered user and have an older low-tech interface, you should consider our
    interface upgrade program.

  • If you're not ready for an interface upgrade, you'll have to use VCDS-Lite instead.

  • All model-year 2019 and newer cars require one of our current interfaces.
    Although this Release of VCDS still supports every interface Ross-Tech has sold since 2004, none of our legacy interfaces such as the HEX+CAN and Micro-CAN will work with 2019 model cars. If you intend to work with 2019 or newer cars and do not yet have a current interface, please contact your distributor or see this page for upgrade options.

  • Support for 'Mk.8' and ID.x chassis is premliminary.
    Auto-Scan should work on these cars, as should most functions that read data, but SFD will limit changes in some control modules. Nonetheless, would appreciate scans and channel maps, preferably posted in our forum.

• The default installation folder is C:Ross-TechVCDS

  • It is essential NOT to install in the Program Files tree in on systems running Windows Vista or newer.

• To remove other old versions:

  • Versions prior to Release 704, simply delete the shortcuts from your Start menu and
    Desktop and delete the folder(s) where the program was installed..

  • Release 704 and newer may be uninstalled using Windows' Add/Remove Programs or by running the
    Uninstall.exe program found in the folder with the version that you wish to remove.

Download:

Includes the VC-Scope and TDI Timing Checker 'Plug-Ins'

Additional handy links:

Vcds Usb Driver Problem

Interactive On-Line Manual

Printable Manual ( ~5 MB)
Download PDF Format VCDS Manual
(Right-Click on the above link and select 'Save Target As..')
You'll need Adobe Acrobat Reader to open the Manual,
if you don't have it you can get it here
You should tell your PDF reader to 'Fit to Printable Area' or use similar instructions
when printing in order to make the images and text as legible as possible.

Ross Tech Hex Usb Driver